1940s RCA Type 44-BX

For sale is this vintage 1940s RCA Type 44-BX velocity ribbon microphone. This particular example, serial number 2118, is in very excellent condition and was completely serviced by Wes Dooley of AEA approximately 3 years ago. Since then, it has been properly stored in a home studio and has been used extremely infrequently. Take advantage of this very reasonable offer, and add the ultimate ribbon mic to your arsenal.

This mic was re-ribboned with original RCA stock, and was adapted for use with an XLR cable. It sounds great and is ready to go!

The Type 44-BX Velocity Microphones (MI-4027-B, -D, -H, -J and -K) are high-fidelity micro phones of the ribbon type that are specially designed for broadcast studio use. They are constructed to withstand mechanical shocks, and to retain sensitivity and frequency response regardless of changes in temperature, humidity, and barometric pressure. Their essentially flat frequency response (50 to 15,000 cycles) is suitable for reproducing both voice and music. One of the most useful properties of a velocity micro phone is its bi-directional or figure-eight directional characteristics. The output of the micro phone is maximum for sounds originating directly in front of or behind the micro phone, and minimum for sounds originating at the sides, top or bottom. This characteristic is valuable for both vocal and musical pickup. For vocal pickup, its chief value lies in the fact that it enables participants in dialog to face each other across the micro phone. For musical pickup, it makes it possible to obtain different effects by arranging orchestral instruments about the micro phone so that the sounds of some instruments are attenuated and others are accentuated. The frequency response of a velocity micro phone is essentially uniform when the sound source is at least three feet from the micro phone, but the low frequencies are accentu ated when the sound source is closer to the micro phone. Speakers and singers are often required to stand close to the micro phone, and the low-frequency accentua tion which occurs is undesirable except when special effects are wanted. To solve this problem, a jumper connection is provided on the micro phone terminal board that provides either of two degrees of compensation for close talking. When the jumper is in the M (music) position no compensation is provided, and the response is essentially uniform from 50 to 15,000 cycles per second, provided that the announcer or musical instrument is at least three feet from the micro phone. However, the announcer may move as close to the micro phone as 12 inches when the jumper is in the V1 position, or seven inches when it is in the V2 position, without causing objectionable low-frequency boost. (V1 -5dB shelf at 100hz, V2 -10dB shelf at 100hz) This particular example has been modified with a switch for easy switching between M and V.

Sale Price: Sold